Table of Contents Page
........RAP 10C: Serial Interface Problem 123
........RAP 10D: Data Receive Failure (Alarm Light Lit) 124
........RAP 11: Color Ribbon Shift Problem 125
4.8 Printer Tests 126
....4.8.02 Font Test 127
....4.8.03 Serial Interface - Loopback Test 128
....4.8.04 Hexadecimal Dump 129
4.9 Resistance Checks - General Information 130
....4.9.02 Printhead Resistance Check 131
....4.9.03 Line Feed Motor Resistance Check 132
....4.9.04 Space Motor Resistance Check 133
....4.9.05 Ribbon Motor Resistance Check 134
A Board Diagrams
A.1 Overview - General Information 135
A.2 Index To Charts 136
....A.2.01 Main Controller Board (TFCB) 137
............ML395/395C Jumper Plugs SP2 : Jim
Fitzpatrick/Project Leader/Okidata; 11/18/96
138
....A.2.02 Power Supply Board (POW) 139
....A.2.03 Interface Board (TFIF) 140
............Change sp102 jumper : Eric
Tomenga/OKI_ELECTRIC/US
141
............Shorting Plug SP102 : Jim Fitzpatrick/Project
Leader/Okidata; 11/18/96
142
....A.2.04 Sensor Board (LQEW) 143
....A.2.05 Operator Panel (TFOP) 144
B Illustrated Parts Listing
B1.1 Overview - General Information 145
....B.1.02 Definition of Terms 146
....B.1.03 Parts Ordering Information 147
B.2 Charts 148
....B.2.01 Upper Cover Assembly 149
....B.2.02 Printer Unit General Assembly 150
....B.2.03 Operator Panel 151
....B.2.04 Carriage Assembly (Black and White) 152
....B.2.05 Carriage Assembly (Color) 153
....B.2.06 Printer Unit - Black and White (1 of 3) 154
....B.2.07 Printer Unit - Black and White (2 of 3) 155
....B.2.08 Printer Unit - Black and White (3 of 3) 156
....B.2.09 Printer Unit - Color (1 of 3) 157
....B.2.10 Printer Unit - Color (2 of 3) 158
....B.2.11 Printer Unit - Color (3 of 3) 159
....B.2.12 Cables and Connectors 160
....B.2.13 Options 161
To Next Page
Loading...
