2-1
Okuma America Corporation
DOCUMENTDOCUMENT
DOCUMENTDOCUMENT
DOCUMENT
AA
AA
A
TIONTION
TIONTION
TION
Rev. 1-16-01
The following is a list of the common manuals that come with every Okuma machine:
OPERATION
MAINTENANCE
OPERATION & MAINTENANCE
SPECIAL FUNCTIONS #1,2,3 or 4
ELECTRICAL SCHEMATICS
ALARM & ERROR LIST
PROGRAMMING
DRIVE UNITS
PARTS BOOK
The following is a brief description of the subject matter of each manual.
OPERATION Manual
This manual contains information about the basic operation of the machine. The file handling
procedures and communication protocol are also explained in this manual. The last part of this
manual explains the parameters in the control.
MAINTENANCE Manual
This manual has information pertaining to the electrical side of the machine. A description of
the boards and the power requirements along with the layout of the electrical components are
shown in this manual.
OPERATION & MAINTENANCE Manual
This manual has the information pertaining to the mechanical side of the machine. Foundation
and leveling information along with lubrication specifications are in this manual.
To Next Page
Loading...
