d-Color MF 3300/3800 2-13
2.2 Preparation for printing (USB connection)
2
2.2.3 Initializing the printer driver
Configuring the optional environment of this machine
When you use this machine for the first time, configure the printer driver so that it contains information such
as what options are installed on this machine and whether or not authentication settings have been config-
ured.
1 Display the [Properties] window of the printer driver.
% For information on how to display the [Properties] window, refer to page 2-53.
2 In the [Configure] tab, configure the information such as what options are installed on this machine and
whether or not authentication settings have been configured.
% If you are using Windows Vista/7/8/Server 2008/Server 2008 R2/Server 2012, [Auto] under [Acquire
Settings...] is enabled by default. Thus, the information of this machine is automatically obtained and
applied for [Device Option].
% When [Auto] in [Acquire Settings...] is disabled, clicking [Acquire Device Information], obtains and
reflects the information on this machine to [Device Option].
% If you are using Windows XP/Server 2003, set the option manually using [Device Option]. Select the
item to change from the list, and set a value in [Setting].
3 Click [OK].
Change the default print settings
If necessary, you can change the default print settings of the printer driver.
1 Display the [Printing Preferences] window of the printer driver.
% For information on how to display the [Printing Preferences] window, refer to page 2-56.
2 Change the print settings, and click [OK].
The changed settings are applied when printing is performed from any application software.
dReference
The printer driver contains a function to save favorite settings. For details, refer to page 2-14.
To Next Page
Loading...
Need help?
General
