d-Color MF222 plus/MF282 plus/MF362 plus/MF452 plus/MF552 plus 3-41
3.3 Fax Function
3
Checking network settings of this machine
Tap [Utility], and select [Device Information]. Check that the IP address is displayed.
If no IP address is displayed, you need to configure the network.
- Tap [Utility], and select [Administrator Settings] - [Network Settings] - [TCP/IP Settings]. Configure the
required settings to suit your environment. For details, refer to the [User's Guide Online] on the DVD.
d Reference
In general, the default settings are available for network connection; however, some network environments
require a change on network settings. For details, refer to the [User's Guide Online] on the DVD.
• For IPv4 environment • For IPv6 environment
To Next Page