d-Color MF222 plus/MF282 plus/MF362 plus/MF452 plus/MF552 plus 3-3
3.1 Print Function
3
3 Basic Settings and Operations
3.1 Print Function
3.1.1 Required settings and basic operations (For Windows OS)
Print data created on your computer via the network.
This section describes how to configure standard print settings using the installer.
Preparation flow
The following describes a preparation flow to print data. For details, refer to the relevant page.
This preparation is not required the second time or subsequent times.
1 Checking the cable connection (Administrator)
% Check that this machine is correctly connected to the network cable. For details, refer to page 3-4.
2 Checking network settings of this machine (Administrator)
% Check the network settings of this machine. For details, refer to page 3-4.
The network can be used with the default settings unless otherwise requested.
3 Installing the printer driver
% Install the printer driver on the computer. For details, refer to page 3-5.
Operation flow
The following describes a flow to print data from your computer. For details, refer to page 3-5.
1 Opening original data
% Open the data you want to print using the application software.
2 Configuring the printer driver for printing
% Select a printer driver, and change the setting if necessary before printing.
To Next Page
Loading...
Need help?
General