About this machine
2
2-6 d-Color MF222 plus/MF282 plus/MF362 plus/MF452 plus/MF552 plus
2.2
No. Name Description
1 Main unit Scans the original in the scanner section, and prints a scanned im-
age in the printer section.
2 Fax Kit FK-511 Required to use the fax function.
3 Authentication Unit
AU-102 (Biometric Type)
Working Table WT-506 is required as a stand.
4 Authentication Unit
AU-201 (IC Card Type)
Working Table WT-506 is required as a stand.
5 Working Table WT-506 Provides an area to temporarily place an original or other materials.
This is also used when the Authentication Unit is installed.
6 Keypad KP-101 It is equipped on the side of the Control Panel. Allows you to enter
numbers by using the hardware keypad.
7 Keyboard Holder KH-102 Install this holder to use an external keyboard.
8 Security Kit SC-508 Supports functions such as Copy Guard to prevent unauthorized
copying.
9 Mount Kit MK-730 Used to print on banner paper.
10 Image Controller IC-414 Built-in Image Controller. Installing this unit provides higher quality
printing results.
11 Large Capacity Unit
LU-301
Allows you to load up to 3000 sheets of 8-1/2 e 11 (A4) size paper.
12 Large Capacity Unit
LU-204
Allows you to load up to 2500 sheets of SRA3 or 11 e 17 (A3) size
paper.
13 Desk DK-510 Used to place this machine on the floor.
14 Paper Feed Cabinet
PC-410
Can load up to 2500 sheets of 8-1/2 e 11 (A4) size paper.
15 Paper Feed Cabinet
PC-210
Can load up to 500 sheets respectively into the top and bottom
trays.
16 Paper Feed Cabinet
PC-110
Can load up to 500 sheets into the top tray. (The bottom tray is a
storage box.)
17 Desk DK-705 Used to place this machine on the floor.
18 Saddle Stitcher SD-511 Used to add the bind/fold function to the Finisher FS-534.
19 Finisher FS-534 Sorts, groups, or staples output sheets as required.
20 Punch Kit PK-520 Used to add the punch function to the Finisher FS-534.
21 Saddle Stitcher SD-512
Used to add the bind/fold function to the Finisher FS-535 (only for
d-Color MF552 plus).
22 Finisher FS-535 Sorts, groups, or staples output sheets as required (only for d-
Color MF552 plus).
23 Punch Kit PK-521 Used to add the punch function to the Finisher FS-535 (only for d-
Color MF552 plus).
24 Z Folding Unit ZU-606 Adds the Z-fold or punch function to the Finisher FS-535 (only for
d-Color MF552 plus).
25 Job Separator JS-602 Feeds out printed sheets (only for d-Color MF552 plus).
26 Post Inserter PI-505 Inserts a cover sheet into copied or printed sheets (only for d-Color
MF552 plus).
27 Output Tray OT-506 Collects printed pages.
28 Finisher FS-533 Sorts, groups, or staples output sheets as required. This unit can be
installed in this machine.
29 Punch Kit PK-519 Used to add the punch function to the Finisher FS-533.
30 Job Separator JS-506 Used to separate output sheets into two trays in the body of the ma-
chine.
The following options are built into this machine and are not shown in the figure above.
31 Stamp Unit SP-501 Stamps a scanned original when sending a fax.
To Next Page
Loading...
