Olympus 27MG - Page 96

DMTA-10043-01EN, Rev. C, July 2016
Index 88
Measurement mode, dual element transducer
57
Measurement Reset function 54
measurement screen 27
measurement techniques 31
measurements
features 15
high temperature 66
performing 41
problems 70
rate 49
setup menu 46
standard resolution 31
messages, error 70
microprocessor 59
Min/Max mode 47
Max scanning mode 47
Min scanning mode 47
mode, programmable alarm 58
modes, LCD display 58
modification prohibited, instrument 6
N
NFPA 70 safe operation, explosive atmosphere
58
NiMH rechargeable batteries, AA-sized 24
NOTE signal word 8
notes, information, signal words 7
O
Olympus technical support 13
on/off key See keys, power
operating temperature range, instrument 57
operating time, batteries 24, 58
P
parameter selection, writing convention 29
parameter, screens 28
power key 17, 21
power level, batteries 23
power requirements, instrument 23
powering on, instrument See turning on, instru-
ment
precautions, batteries 9
product description 15
protective rubber boot 16
strap rings 16
pulse-echo 59
R
radix parameter 51
range, instrument operating temperature 57
range, material velocity 57
range, thickness 57
rating label
location 1
RCM mark 2
receiver bandwidth 58
repair, instrument 6
replacing, batteries 25
RESET key 19
resets 53
master 54
measurement 54
resolution, display 57
changing 47
right arrow key 20
RoHS
marking 3
RoHS symbol 10
rubber boot, protective 16
S
safe operation, explosive atmosphere
(NFPA 70) 58
safety
instrument compatibility 6
misuse of instrument 5
signal words 7
symbols 6
screens
Backlight mode 51
measurement 27
parameter 28
title bar 29
screw, battery compartment door 25
secondary key function 19
serial number format 3
serial number label
content 3
location 1
SETUP secondary key 20
signal words
information notes 7
IMPORTANT 7