Olympus BH2 Series - Page 34

t-
. .
4-3 -7
Mount the Inner Guide (Fig. 4-5) on the Arm
[& --<, (Fig. 4-4). (See Fig. 4-7.)
' Fig. 4-7
.-
- .
4-1 -8
Assemble Ball Guide (Fig. 4-6) in the follow-
Ing manner:
.+-- - -& a) Push in the Ball Guide and assemble it in
position. (See Fig. 4-8.)
b) If the Ball Guide is too tight loosen Screw
vLb-:
- -------= ,
wf ;
AB3xl6SA which is used for the Guide
9
>'
' + . :f, ,.-p
Fixing Piece.
/AB024800 L:~ ".dl'= c) By tightening two Screws AB3xlGSA,
<. .
4. -,:d -
.- -I_ -T-
clamp the Guide Fixing Piece to such a
degree that the Ball Guide is free from
-
play
Fig. 4-8
- -
4-1-9 Fix Ball Guide AB024800 and Inner Ball
Guide A8024700 by tightening four Screws
AB3x12SA. (See Fig. 4-9.)
AB3x12SA
*
Fig. 4-9