7
Playback
Single-frame playback
108
When the AC adapter is used, the camera does not turn off automatically.
Viewing still images
1
Press the (playback mode) button.
● The monitor turns off after about 1 minute if
no operations are performed. After about 1
hour without being used, the camera will turn
off automatically. Turn on the camera again.
2
Use the arrow pad to select images you want to view.
● Pressing the shutter button halfway resumes the shooting mode.
The last recorded image appears.
Displays the frame that is stored 10 frames back.
Displays the frame that is stored 10 frames ahead.
Displays the next
frame.
Displays the previous
frame.
button
SQ
’04.01.01 00:00
100–0015 15
There are several different ways to view and edit images. However, before using
any of these functions, follow step 1 below.
Arrow pad
Note
07E-300EN-P107 04.10.22 11:29 AM Page 108
To Next Page
Loading...
