Olympus EVOLT E-300 - Erasing Images; Single-Frame Erase

7
Playback
1
Play back the image you want to
erase.
2
Press the (erase) button.
● The ERASE screen is displayed.
3
Press to select YES, then press
the OK button.
MENU
120
Single-frame erase
Erasing images
Lets you erase recorded images. You can select either single-frame erase, which
erases only the currently displayed image, or all-frame erase, which erases all the
images stored on the card.
ERASE SETTING
In the ERASE SETTING screens in the menu, you can set the screen cursor
setting to YES. ~ “ERASE SETTING” (P. 128)
2
ERASE screen
ERASE
NO
YES
CANCEL SELECT GO MENU
OK button
button
● Protected images cannot be erased. Cancel protected images, then erase
them.
● Once erased, images cannot be restored. ~ “Protecting images
— Preventing accidental erasure” (P. 119)
Note
07E-300EN-P107 04.10.22 11:30 AM Page 120