Olympus EVOLT E-300 - Metering Mode-Changing the Metering Area

6
Exposure, image and color
1
Press the (metering) button.
● The current setting is displayed on the
monitor.
2
Rotate the control dial until the
desired setting is displayed.
86
Metering mode—Changing the metering area
There are 3 ways of measuring the subject brightness: Digital ESP metering,
Center weighted averaging metering and spot metering. Select the most suitable
mode depending on the shooting condition.
MENU
Control dial
When the control panel screen is off
button
Viewfinder
The selected metering
mode is displayed in
the viewfinder.
P A S M
Available modes
ESP
06E-300EN-P85 04.10.22 11:25 AM Page 86