Olympus EVOLT E-300 - RESET -Restoring the Factory Default Setting; Erase Setting

1
Menu TTRESET
~ “How to use the menus” (P. 25)
2
Press .
● The RESET screen is displayed.
3
Press to select YES. Press the
OK button.
2
128
8
Customizing the settings/functions of your camera
RESET —Restoring the factory default setting
Normally, current camera settings (including any changes you have made) are
retained when the power is turned off. If you prefer the original setting to be
restored, you can use this function to restore the factory default settings after the
power is turned off.
RESET
YES
NO
CANCEL SELECT GO MENU
P A S M
SCENE
Available modes
MENU
OK button
ERASE SETTING
This allows you to customize the cursor position (YES or NO) as the initial position
on the ALL ERASE, ERASE or FORMAT screen.
P A S M
SCENE
Available modes
1
Menu TTERASE SETTING T YES, NO
~ “How to use the menus” (P. 25)
2
Press the OK button.
2
08E-300EN-P123 04.10.22 11:32 AM Page 128