Olympus EVOLT E-300 - Ael Metering; Ev Step; Manual Flash

8
Customizing the settings/functions of your camera
124
AEL METERING
1
Menu TTAEL METERING T
AUTO, ESP, ,
~ “How to use the menus” (P. 25)
2
Press the OK button.
Set the metering mode before using the AEL button to lock the exposure. This
allows the camera to automatically apply the selected metering mode when the
AEL lock function is used.
P A S M
Available modes
EV STEP
This allows you to change the EV step for exposure parameter setting, such as
shutter speed, aperture value or exposure compensation value, etc.
P A S M
Available modes
1
Menu TTEV STEP T 1/3EV, 1/2EV, 1EV
~ “How to use the menus” (P. 25)
2
Press the OK button.
MANUAL FLASH
This allows the built-in flash to output a fixed amount of light. With MANUAL
FLASH set to ON, you can set the amount of light to FULL, 1/4, 1/16, or 1/64 with
the (flash) button.
1
Menu TTMANUAL FLASH T ON
~ “How to use the menus” (P. 25)
2
Press the OK button.
P A S M
Available modes
MENU
OK button
08E-300EN-P123 04.10.22 11:32 AM Page 124