Olympus EVOLT E-300 - VIDEO out -Selecting the Video Signal Type before TV Connection

1
Menu TTVIDEO OUT T NTSC,
PAL
~ “How to use the menus” (P. 25)
2
Press the OK button.
2
134
8
Customizing the settings/functions of your camera
VIDEO OUT —Selecting the video signal type before TV connection
MENU
OK button
This lets you select NTSC or PAL according to your TV's video signal type. Make
sure the correct video signal type is selected before connecting the AV cable.
If you use the wrong video signal type, recorded pictures will not play back
properly on your TV.
TV video signal types & main regions
Check the video signal type before
connecting the camera to your TV.
NTSC North America, Japan, Taiwan,
Korea
PAL European countries, China
P A S M
SCENE
Available modes
08E-300EN-P123 04.10.22 11:32 AM Page 134