Date/time setting
1
Menu TT
~ “How to use the menus” (P. 25)
2
Press .
● The screen is displayed.
3
Press to select one of the
following date formats:
Y-M-D (Year/Month/Day),
M-D-Y (Month/Day/Year),
D-M-Y (Day/Month/Year).
Then press .
● The following steps show the procedure used
when the date and time settings are set to Y-
M-D.
4
Press to set the year, then press
to move to the month setting.
● To return to the previous setting, press .
● The first two digits of the year are fixed.
5
Repeat this procedure until the date
and time are completely set.
● The time is displayed in the 24-hour format.
For example, 2 p.m. will be displayed as 14:00.
6
Press the OK button.
● For a more accurate setting, press OK when the time signal hits 00 seconds.
The clock starts when you press the button.
2004 . 01 . 01
00 : 00
Y M D
CANCEL SELECT
GO
MENU
2004 . 01 . 01
00 : 00
CANCEL SELECT
GO
MENU
Date and time information is recorded on images. The file No. is also included with
the date and time information.
P A S M
SCENE
Available modes
The date/time setting is saved for approximately 3 months using the built-in
battery. Depending on how the camera is used, the date/time setting may be
erased earlier. Date/time settings will also be lost if the camera is left for a long
period with no battery loaded. The internal battery will be fully recharged in
about one day with the camera’s battery loaded.
Note
127
8
Customizing the settings/functions of your camera
OK button
08E-300EN-P123 04.10.22 11:32 AM Page 127
To Next Page
Loading...
