Olympus EVOLT E-300 - Connecting the Camera to a Computer

1
Insert the marked end of the provided
USB cable into the USB port on your
computer.
2
Insert the provided USB cable into the
USB connector.
3
Set the camera’s power switch to ON.
4
Press to select PC. Press the
OK button.
Connecting the camera to a computer
163
10
Transferring images to a computer
Connect the camera to your computer with the provided USB cable.
USB cable
Look for this mark.
USB port
Terminal
USB connector
Smaller terminal
The location of the USB port varies
depending on the computer. For details,
refer to your computer’s manual.
The selection screen for the USB
connection is displayed.
P C
PRINT
EXIT
USB
SELECT GO
Power switch
10E-300EN-P155 04.10.22 11:36 AM Page 163