Olympus EVOLT E-300 - How to Select the Record Mode; Setting HQ;SQ

2
Things to know before shooting
36
Selecting the record mode
How to select the record mode
1
Press the (record mode) button.
● The current setting is displayed on the
monitor.
2
Rotate the control dial until the setting
you want to select is displayed.
MENU
Control dial
Compression rate selection
PIXEL COUNT: Selects the number of
pixels. (SQ only)
COMPRESSION: Selects compression rate.
SQ
button
NOISE REDUCTION
1/4
1/8
HQ
SQ
1
2
1
2
CANCEL MENU SELECT GO
OK button
Setting HQ/SQ
1
Menu TT HQ, SQ. ~ “How to use the menus” (P. 25)
2
Press to move to the setting.
Press to select a setting. Press the OK button.
To select both COMPRESSION and PIXEL COUNT, press to move from
PIXEL COUNT to COMPRESSION.
When the control panel screen is off
SQ
1/81280x980
PIXEL COUNT COMPRESSION
CANCEL SELECT GO
P A S M
SCENE
Available modes
P A S M
SCENE
Available modes
You can select the number of pixels (PIXEL COUNT) and compression rate
(COMPRESSION).
02E-300EN-P29 04.10.22 11:18 AM Page 36