Olympus EVOLT E-300 - Setting the One-Touch White Balance

97
6
Exposure, image and color
Setting the one-touch white balance
This function is useful when you need a more precise white balance than preset
WB can provide. Point the camera at a sheet of white paper under the light source
you want to use to determine the white balance. The optimum white balance for
the current shooting conditions can be saved in the camera.
This is useful when shooting a subject under natural light, as well as under various
light sources with different color temperatures.
White balance—Adjusting the color tone
1
Menu TT
~ “How to use the menus” (P. 25)
2
Press .
● The screen appears.
3
With the screen displayed, point
the camera at a sheet of white paper.
● Position the paper so that it fills the
viewfinder. Make sure there are no shadows.
4
Set the aperture and shutter speed to
obtain the optimum exposure.
5
Press the OK button.
● The white balance is registered.
● The registered white balance will be
stored in the camera as a preset WB
setting. Turning the power off does not
reset the data.
~ “Setting the white balance” (P. 95)
NO
YES
CANCEL SELECT GO MENU
Lighting used
for shooting
OK button
P A S M
Available modes
06E-300EN-P85 04.10.22 11:26 AM Page 97