Olympus EVOLT E-300 - Setting the Flash Mode

4
Various shooting functions
1
Press the (flash) switch to raise the
flash.
2
Press the (flash mode) button.
● The current setting is displayed on the
monitor.
3
Rotate the control dial until the
desired setting is displayed.
58
Setting the flash mode
Flash shooting
(flash mode) button
Control dial
Flash
P A S M
Available modes
AUTO
MANUAL FLASH
When MANUAL FLASH (~ P. 124) in the menu is set to ON, the flash emits a
fixed amount of light.
(flash) switch
When the control panel screen is off
MENU
04E-300EN-P53 04.10.22 11:22 AM Page 58