205
Specifications
12
Information
Exposure control
Metering system : TTL full-aperture metering system
(1) Digital ESP metering
(2) Center weighted average metering
(3) Spot metering (approx. 2% for the viewfinder screen)
Metering range : (1) EV 2 - 20 (Digital ESP metering, Center weighted average
metering)
(2) EV 3 - 17 (Spot metering)
(At normal temperature, 50 mm F2, ISO 100)
Exposure mode : (1) P: Program AE (Program shift can be performed)
(2) A: Aperture priority AE
(3) S: Shutter priority AE
(4) M: Manual
ISO sensitivity : 100 - 400 (High ISO values (800 and 1600) are available)
Exposure compensation : Exposure can be adjusted in 1/3, 1/2 or 1 EV step within a range
of ± 5 EV.
White balance
Product type : CCD
Mode setting : Auto, Preset WB (8 settings), customized WB (4 settings can be
registered), One-touch WB
Recording
Memory : CF card (Compatible with Type I and II)
Microdrive compatible (Compatible with FAT 32)
Recording system : Digital recording, TIFF (non-compression), JPEG (in accordance
with Design rule for Camera File system (DCF)), RAW Data
Applicable standards : Exif 2.2, Digital Print Order Format (DPOF), PRINT Image
Matching II, PictBridge
Playback
Playback mode : Single-frame playback, Close-up playback, Index display, Image
rotation, slideshow
Information display : Information display, Histogram display
Drive
Drive mode : Single-frame shooting, Sequential shooting, Self-timer,
Remote control
Sequential shooting : 2.5 frames/sec. (Max. no. of storable sequential pictures: 4
frames in RAW/TIFF)
Self-timer : Operation time: 12 sec., 2 sec.
Optical remote control : Operation time: 2 sec., 0 sec. (instantaneous shooting)
Flash
Synchronization : Synchronized with the camera at 1/180 sec. or less
Flash control mode : TTL-AUTO (TTL pre-flash mode), AUTO, MANUAL
External flash attachment : Hot shoe
Specifications
12E-300EN-P191 04.10.22 11:40 AM Page 205
To Next Page
Loading...
