2
Things to know before shooting
31
2
Press the shutter button halfway until
the AF confirmation mark lights.
● The focus is locked. The AF confirmation
mark and the AF focusing frame light up in
the viewfinder.
● If the AF confirmation mark blinks, the focus
and exposure are not locked. Release your
finger from the shutter button, re-position
your subject and press the shutter button
halfway again.
● The control panel screen disappears.
3
While keeping the shutter button
pressed halfway, re-compose your
shot.
4
Press the shutter button all the way.
● A picture is taken.
● The card access lamp blinks while the picture
is being stored on the card.
If correct focus cannot be obtained
Halfway down
All the way
down
AF confirmation mark
02E-300EN-P29 04.10.22 11:17 AM Page 31
To Next Page
Loading...
