EasyManua.ls Logo

Olympus VISERA CLV-S40 - Signal Word Definitions; General Safety Precautions

Olympus VISERA CLV-S40
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Important Information — Please Read Before Use
5
VISERA XENON LIGHT SOURCE CLV-S40
Signal words
The following signal words are used throughout this manual:
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury. It may also
be used to alert against unsafe practices or potential
equipment damage.
Indicates additional helpful information.
Dangers, warnings and cautions
Follow the dangers, warnings and cautions described below when handling this
instrument. This information is supplemented by the dangers, warnings and
cautions described in each chapter.
Any applied part except “TYPE CF APPLIED PART” must
never be applied directly to the heart and must not be used in
procedures involving cardiac observation or surgery.
Leakage current from any applied part except “TYPE CF
APPLIED PART” may be dangerous and cause ventricular
fibrillation or otherwise seriously affect the cardiac function of
the patient. Accordingly, always adhere to the following:
Never apply an endoscope connected to any applied part
except a “TYPE CF APPLIED PART” to the heart or any
area near the heart.
Never allow an accessory or another endoscope, which is
in contact with the heart (or an area near the heart) to
contact an endoscope connected to any applied part
except a “TYPE CF APPLIED PART”.

Related product manuals