Chapter 3 Installation and Connection
29
VISERA XENON LIGHT SOURCE CLV-S40
3.3 Connection to an Olympus video system
(OTV-S7V, etc.)
To view the endoscopic image on a TV monitor, prepare an Olympus video
system, such as the OTV-S7V.
Connect the light control cable supplied with the Olympus video system to the
LIGHT CONT. connector on the rear panel (see Figure 3.16).
Figure 3.16
Video system Cable
OTV-S5 MH-988
OTV-S6 MAJ-586
OTV-S7V MAJ-944
OTV-SX MB-608
OTV-SX2 MAJ-439
LIGHT CONT. connector
Light control
cable
To Next Page
Loading...
