14
Chapter 2 Instrument Nomenclature
VISERA XENON LIGHT SOURCE CLV-S40
2.2 Front panel
1. Power switch indicator
The indicator lights when the light source is ON.
2. Power switch
Press the switch to turned power ON or OFF. The xenon lamp lights up
simultaneously.
3. Connector cover
When this cover is removed, a fiber scope (BF TYPE 40 series/CHF TYPE
20 series) can be connected.
8. AUTO indicator
11. Emergency lamp
indicator
7. MANUAL indicator
1. Power switch
indicator
14. High intensity
mode indicator
9. Brightness control indicator
10. Brightness control switches
12. Brightness level indicator
13. Intensity mode selector
2. Power switch
3. Connector cover
4. Output connector
5. Standby mode indicator
6. AUTO/MANUAL brightness selector
17. Emergency lamp switch lever
15. Lamp life meter
16. Standby switch
To Next Page
Loading...
