Technical Data
41
6TECHNICAL DATA
Guaranteed Values:
• General:
The values are valid for the period of one year after factory calibration,
within 23 °C ± 5 °C at nominal value and after a warm-up time greater
than 25 min.
• Guaranteed values from the generator outputs:
The values are valid in the frequency range from 10 to 100 Hz unless
specified otherwise. Given maximum phase errors are related to the
voltage amplifier outputs.
• Accuracy data for analog outputs are valid in the frequency range from
0 to 100 Hz unless specified otherwise.
• The given input/output accuracy values relate to the range limit value
(% of range limit value).
6.1 Main Power Supply
Table 6-1:
Power supply data
Main Power Supply
Connection Connector according to IEC 60320-1 C14
Voltage, single phase
nominal voltage
operational range
100-240V
AC
85 ... 264 V
AC
Power fuse T 12.5 AH 250 V (5 x 20 mm)
"Schurter", order number 0001.2515
Nominal current
1
1
Refer to section 6.3.4, "Operational Limits in Conjunction with Mains Supply" on page 53.
at < 170 V: 12 A max.
at > 170 V: 10 A max.
Frequency
nominal frequency
operational range
50/60 Hz
45 ... 65 Hz
Overvoltage category II
To Next Page
Loading...
Need help?
General
