Omicron CMC 356 User Manual

Technical Data
75
6.11.4 Measuring Currents
Since the analog inputs of the CMC 356 are voltage inputs, current
measurement has to be performed using suitable active current clamps with
voltage outputs or shunt resistors.
OMICRON offers the C-PROBE1 as a suitable current clamp. The
C-PROBE1 is not included in the scope of delivery of option ELT-1 and thus
has to be ordered separately.
For further information, please contact OMICRON electronics (refer to
section "OMICRON Service Centers" on page 109).

Omicron CMC 356 Specifications

General

Brand	Omicron
Model	CMC 356
Category	Relays
Language	English