CMC 356 Reference Manual
68
6.6 Environmental Conditions
6.6.1 Climate
Table 6-25:
Climate
6.6.2 Shock and Vibration
Table 6-26:
Shock and vibration
6.7 Mechanical Data
Table 6-27:
Data regarding size and
weight
6.8 Cleaning
To clean the CMC 356, use a cloth dampened with isopropanol alcohol or
water. Prior to cleaning, always switch off the power switch and unplug the
power cord from the mains.
Climate
Operating temperature 0 ... +50 °C;
above +30 °C a 50 % duty cycle may apply.
Storage and transportation -25 … +70 °C
Max. altitude 2000 m
Humidity 5 … 95% relative humidity; no condensation
Climate Tested according to IEC 60068-2-78
Dynamics
Vibration Tested according to IEC 60068-2-6;
frequency range 10 ... 150 Hz; acceleration
2 g continuous (20 m/s²); 10 cycles per axis
Shock Tested according to IEC 60068-2-27;
15 g / 11 ms, half-sinusoid, each axis
Size, Weight and Protection
Weight 16.8 kg (37 lbs)
Dimensions W x H x D (without handle) 450 x 145 x 390 mm
(17.7x5.7x15.4")
Housing IP20 according to EN 60529
To Next Page
Loading...
Need help?
General
