CMC 356 Reference Manual
8
SAFETY INSTRUCTIONS
Before operating the CMC 356 test set, carefully read the following
safety instructions.
Only operate (or even turn on) the CMC 356 after you have read this
reference manual and fully understood the instructions herein.
The CMC 356 may only be operated by trained personnel. Any
maloperation can result in damage to property or persons.
For Your Safety Please Note
The CMC 356 test set can output life-hazardous voltages and currents.
Throughout the manual, this symbol indicates special safety-relevant
notes/directions linked to the possibility of touching live voltages and/or
currents. Please thoroughly read and follow those directions to avoid life-
hazardous
situations.
This symbol indicates potential hazards by electrical voltages/currents
caused by, for example, wrong connections, short-circuits, technically
inadequate or faulty equipment or by disregarding the safety notes of the
following sections.
Rules for Use
•The CMC 356 should only be used when in a technically sound
condition. Its use should be in accordance with the safety regulations for
the specific job site and application. Always be aware of the dangers of
the high voltages and currents associated with this equipment. Pay
attention to the information provided in the reference manual and the
software documentation.
•The CMC 356 is exclusively intended for the application areas specified
in section 1, "Designated Use" on page 13. The manufacturer/
distributors are not liable for damage resulting from unintended usage.
The user alone assumes all responsibility and risk.
• The instructions provided in this reference manual and the associated
software manuals are considered part of the rules governing proper
usage.
• Do not open the CMC 356 or remove any of its housing components.
To Next Page
Loading...