GSM jamming detector can be activated when SMS configuration is enabled (see GSM
and SMS parameters).
“Send SMS upon GSM signals jamming attempts detection” – check the box to send
SMS upon registering the GSM network signal jamming.
Service Functions
Terminal Reboot
In the “Service” menu select “Restart Terminal”.
Setting Password on Configuration Changing
In the “Settings” tab select the “Additional equipment” section from the list.
In the “Configuring a password” section:
If you need to use a password to configure the terminal settings, in the field “Ask for
password when saving settings” select “Enabled”. Press the “Change password”
button. A window will open:
To Next Page
Loading...
