“Maximum movement speed, km/h”. Default value – 180 km/h. Possible values: from
5 to 360.
The default values allow elimination of drift for most cases and do not require
correction.
Data Transmission to the Communication Server
In the “Settings” tab select the “Connection” section from the list.
In the “Parameters of output for connection” section:
“Interval of sending data to the server” – enter the number of minutes, upon
expiration of which the terminal must establish connection with the communication
server, while being in the mobile operator's home network. Recommended value – 10
minutes.
In the “Communication parameters of GSM and SMS” section:
“SMS” – enable/disable the commands reception via SMS and sending the information
messages by the Terminal.
“SMS destination number” – enter the phone number, to which the SMS will be sent
with information about the status of the Terminal and the vehicle.
“Language of SMS template” – select the language of the SMS template. Possible
options: Russian, English, Portuguese, Spanish.
“Vehicle Name” – enter the name of the vehicle. The “Vehicle Name” field is mandatory.
In the “Output parameters to communicate in roaming” section:
To Next Page
Loading...
