When connecting to the “Struna +” system or the “PMP-201” sensor:
“Fuel tank volume, L” – enter the fuel tank volume. Possible values: 0 to 65,000
“Current fuel volume, L” – displays the current volume according to the “Struna +”
system or the “PMP-201” sensor
Connect the “PMP-201” sensor and the “Struna +” system according to the
documentation on these devices. You may connect only one “Struna +” system. The
network address, by default, is 80.
Connect one Omnicomm LLS fuel level sensor to the Terminal Omnicomm Profi, Profi
Wi-Fi according to the diagram:
Connect Omnicomm LLS-AF fuel level sensor to the Terminal Omnicomm Profi, Profi
Wi-Fi according to the diagram:
To Next Page
Loading...
