Omron NX Series Hardware User Manual

Related Manuals
The following manuals are related. Use these manuals for reference.
Manual name Cat. No. Model Application Description
NX-series
NX502 CPU Unit
Hardware
User’
s Manual
W629
NX502-££££
Learning the basic
specifications of the
NX502 CPU Units,
including introductory
information, design-
ing, installation, and
maintenance.
Mainly hardware in-
formation is provid-
ed.
An introduction to the entire NX502
system is provided along with the fol-
lowing information on the CPU Unit.
• Features and system configura-
tion
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
NJ/NX-series CPU Unit
Software User
’
s Manual
W501
NX701-££££
NX502-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
Learning how to pro-
gram and set up an
NJ/NX-series CPU
Unit.
Mainly software in-
formation is provid-
ed.
The following information is provided
on a Controller built with an NJ/NX-
series CPU Unit.
• CPU Unit operation
• CPU Unit features
• Initial settings
• Programming based on IEC
61131-3 language specifications
NJ/NX-series Instructions
Reference Manual
W502
NX701-££££
NX502-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
Learning detailed
specifications on the
basic instructions of
an NJ/NX-series
CPU Unit.
The instructions in the instruction set
(IEC 61
131-3 specifications) are de-
scribed.
NJ/NX-series CPU Unit
Motion Control User
’
s
Manual
W507
NX701-££££
NX502-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
Learning about mo-
tion control settings
and programming
concepts.
The settings and operation of the
CPU Unit and programming con-
cepts for motion control are descri-
bed.
NJ/NX-series
Motion Control Instructions
Reference Manual
W508
NX701-££££
NX502-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
Learning about the
specifications of the
motion control in-
structions.
The motion control instructions are
described.
NJ/NX-series
CPU Unit
Built-in EtherCA
T
®
Port
User
’s Manual
W505
NX701-££££
NX502-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
Using the built-in
EtherCA
T port on an
NJ/NX-series CPU
Unit.
Information on the built-in EtherCAT
port is provided.
This manual provides an introduction
and provides information on the con-
figuration, features, and setup.
Related Manuals
42
NX-series NX502 CPU Unit Hardware User's Manual (W629)

Omron NX Series Specifications

General

Brand	Omron
Model	NX Series
Category	Controller
Language	English