Omron NX Series Hardware User Manual

2 Press the SD Memory Card after you confirm that the SD BUSY indicator (lit while SD Memory
Card access is in progress) and SD PWR indicator (lit while SD Memory Card power is sup-
plied) are no longer lit.
SD Memory Card
The SD Memory Card will be ejected from the compartment.
3 Pull out the SD Memory Card.
4 Close the Memory Card cover.
5-3-10
Battery Installation
Battery to Use
Use the Battery CJ1W-BAT01 which is sold separately.
Precautions for Correct Use
Be sure to install a Battery within two years of the production date shown on the Battery label.
CJ1W-BAT01
18-03
Manufactured in March 2018.
Production Date
5 Installation and Wiring
5-27
NX-series NX502 CPU Unit Hardware User's Manual (W629)
5-3 Mounting and Removing Units
5
5-3-10 Battery Installation

Omron NX Series Specifications

General

Brand	Omron
Model	NX Series
Category	Controller
Language	English