Omron STC-MBS122BPOE

No.19S207-00
15/73
STC-MBS122BPOE / STC-MCS122BPOE
Product Specifications and User’s Guide
5.4 Environmental Specifications
Model Number
STC-MBS122BPOE
STC-MCS122BPOE
Operational
Temperature /
Humidity
Minimum
Environmental Temperature: 0 deg. C,
Environmental Humidity: 0 to 85 %RH (No condensation)
Maximum
Environmental Temperature: +40 deg. C or
Camera housing temperature (top plate) shall not exceed +63 deg. C (*1)
Environmental Humidity: 0 to 85 %RH (No condensation)
Storage Temperature / Humidity
Environmental Temperature: -20 to +70 deg. C,
Environmental Humidity: 0 to 85 %RH (No condensation)
Vibration
20 Hz to 200 Hz to 20 Hz (5 min. / cycle), acceleration 10 G, XYZ 3 directions, 30 min. each
Shock
Acceleration 38 G, half amplitude 6 ms, XYZ 3 directions, 3 times each
Standard Compliancy
EMS: EN61000-6-2, EMI: EN55011
RoHS
RoHS Compliance
(*1) Please insure the camera is installed with the appropriate heat dissipation. If camera has a mounted lens and a tripod
with an aluminum plate, this could decrease the camera housing temperature for heat dissipation. When the internal
temperature sensor on the camera shows less than 75 deg. C, the camera housing temperature (top plate) will be less than
63 deg. C.
Taking these steps will maintain the heat rating of the electronic components of the camera.
Upper side of camera
Measuring point