Omron STC-MBS122BPOE

No.19S207-00
46/73
STC-MBS122BPOE / STC-MCS122BPOE
Product Specifications and User’s Guide
White balance calculate region setting
The size and position for white balance gain calculation region are changeable.
GenICam Parameters
BalanceWhiteAuto
RegionSelector
IEnumeration Type
White balance gain calculation region selection
Selection: Region 0
BalanceWhiteAuto
Width
IInteger Type
Width (horizontal size, in pixel) for white balance gain calculation region
Range: 1 to 4,096
Default: 4,096
BalanceWhiteAuto
Height
IInteger Type
Height (vertical size, in line) for white balance gain calculation region
Range: 1 to 3,000
Default: 3,000
BalanceWhiteAuto
OffsetX
IInteger Type
Horizontal offset (in pixel) for region 0
Range: 0 to 4,095
Default: 0
BalanceWhiteAuto
OffsetY
IInteger Type
Vertical offset (in line) for region 0
Range: 0 to 2,999
Default: 0
The white balance calculation region settings are like below:
BalanceWhite
AutoOffsetY
BalanceWhite
AutoHeight
BalanceWhite
AutoWidth
BalanceWhite
AutoOffsetX
White balance gain
calculation region 0