Omron STC-MBS122BPOE

No.19S207-00
50/73
STC-MBS122BPOE / STC-MCS122BPOE
Product Specifications and User’s Guide
10.13 Image Flip
The horizontal flip image can be selected by “ReverseX”.
The vertical flip image can be selected by “ReverseY”.
GenICam Parameters
ReverseX
IBoolean Type
Horizontal flip image ON / OFF selection
Selection: “False” (Horizontal flip is Off), “True” (Horizontal flip is On)
Default: “False” (Horizontal flip is Off)
ReverseY
IBoolean Type
Vertical flip image ON / OFF selection
Selection: “False” (Vertical flip is Off), “True” (Vertical flip is On)
Default: “False” (Vertical flip is Off)
10.14 LUT Control
The output signal assigned table for input signal.
GenICam Parameters
LUTSelector
IEnumeration Type
Control LUT selection (Luminance is only selectable)
Default: Luminance
LUTEnabled
IBoolean Type
LUT ON / OFF selection
LUTIndex
IInteger Type
Index for LUT
Range: 0 to 4,095
LUTValue
IInteger Type
The output value for input value that specifies by index
Range: 0 to 4,095
LUT Index
0 4095
LUT Value
4095
e.g. LUT usage (low brightness level enhancement)