Omron STC-MBS122BPOE

No.19S207-00
67/73
STC-MBS122BPOE / STC-MCS122BPOE
Product Specifications and User’s Guide
11.11 EventControl
Name
Description
EventSelector
Selects which Event to signal to the host application.
EventNotification [EventSelector]
Activate or deactivate the notification to the host application of the
occurrence of the selected Event.
EventTestData
Category that contains all the data features related to the Event Test
generated using the Test Event Generate command.
EventExposureStartData
Category that contains all the data features related to the Exposure
Start Event.
EventExposure EndData
Category that contains all the data features related to the Exposure
End Event.
EventFrameTriggerData
Category that contains all the data features related to the Frame
Trigger Event.
EventFrameStartData
Category that contains all the data features related to the Frame Start
Event.
EventFrameEndData
Category that contains all the data features related to the Frame End
Event.
EventLine0RisingEdgeData
Category that contains all the data features related to the Line0 Rising
Edge Event.
EventLine0FallingEdgeData
Category that contains all the data features related to the Line0 Falling
Edge Event.
EventLine2RisingEdgeData
Category that contains all the data features related to the Line2 Rising
Edge Event.
EventLine2FallingEdgeData
Category that contains all the data features related to the Line2 Falling
Edge Event.
EventBlockDiscardData
Category that contains all the data features related to the Block
Discard Event.
EventActionLateData
Category that contains all the data features related to the Action Late
Event.
11.12 UserSetControl
Name
Description
UserSetSelector
Selects the feature User Set to load, save or configure.
UserSetLoad [UserSetSelector]
Loads the User Set specified by User Set Selector to the device and
makes it active.
UseSetSave [UserSetSelector]
Save the User Set specified by User Set Selector to the non-volatile
memory of the device.
UserSetDefault
Selects the feature User Set to load and make active by default when
the device is reset.