STC-MBS122BPOE / STC-MCS122BPOE
Product Specifications and User’s Guide
10.2 Frame rate
This parameter sets the frame rare (fps) of output image from camera.
GenICam Parameters
Sets frame rate in Hz unit (*1)
Range is changed with exposure time setting
Default: 8.958878
(*1) The approximate value of set value, sets to camera and display it.
10.3 Gain
The gain has Analog Gain, Digital Gain.
Analog Gain
This parameter sets analog gain.
Selects “AnalogAll” at “GainSelector”, sets gain at “Gain”.
GenICam Parameters
Selects control gain
AnalogAll: Analog Gain
Analog Gain
Range: 0 to 208
Default: 0
Analog Gain Formula
Gain (dB) = “Gain” / 10
Digital Gain
This parameter sets digital gain.
Selects “DigitalAll” at “GainSelector”, sets gain at “Gain”.
GenICam Parameters
Selects control gain
DigitalAll: Digital Gain
Digital Gain
Range: 0 to 255
Default: 0
Digital Gain Formula
Gain (x times) = 1 + (“Digital Gain” / 128)
To Next Page
Loading...
