STC-MBS122BPOE / STC-MCS122BPOE
Product Specifications and User’s Guide
11.10 CounterAndTimerControl
Selects which Counter to configure.
CounterEventSource [CounterSelector]
Select the events that will be the source to increment the Counter.
CounterResetSource [CounterSelector]
Selects the signals that will be the source to reset the Counter.
CounterResetActivation [CounterSelector]
Selects the Activation mode of the Counter Reset Source signal.
CounterReset [CounterSelector]
Does a software reset of the selected Counter and starts it.
CounterValue [CounterSelector]
Reads or writes the current value of the selected Counter.
Selects which Timer to configure.
TimerDuration [TimerSelector]
Sets the duration (in microseconds) of the Timer pulse.
TimerDelay [TimerSelector]
Sets the duration (in microseconds) of the delay to apply at the
reception of a trigger before starting the Timer.
TimerTriggerSource [TimerSelector]
Selects the source of the trigger to start the Timer.
TimerTriggerActivation [TimerSelector]
Selects the activation mode of the trigger to start the Timer.
TimerValue [TimerSelector]
Reads or writes the current value (in microseconds) of the selected
Timer.
To Next Page
Loading...
