7
1–7 Available Manuals
The following table lists other manuals that may be required to program and/
or operate the P-type PCs.
Operation Manuals
and/or
Operation Guides
are
also provided with individual Units and are required for wiring and other
specifications.
Name Cat. no. Contents
Installation Guide W167 Hardware specifications
GPC Operation Manual W84 Programming procedures for the GPC (Graphics Program-
ming Console)
FIT Operation Manual W150 Programming procedures for using the FIT (Factory Intelligent
Terminal
LSS Operation Manual W113 Programming procedures for using LSS (Ladder Support Soft-
ware)
Printer Interface Unit Operation Guide W107 Procedures for interfacing a PC to a printer
PROM Writer Operation Guide W155 Procedures for writing programs to EPROM chips
Floppy Disk Interface Unit Operation Guide W119 Procedures for interfacing a PC to a floppy disk drive
Optical Remote I/O System Manual W136 Information on building an Optical Remote I/O System to en-
able remote I/O capability
Host Link System Manual W143 Information on building a Host Link System to manage PCs
from a ‘host’ computer
K-type Analog I/O Units Operation Guide W122 Hardware and software information on using Analog I/O Units
with the P-type PCs.
Available Manuals Section 1–7
To Next Page
Loading...
Need help?
General
