Omron SYSMAC CS Series User Manual

xvi
About this Manual, Continued
When using CJ Series Loop-control CPU Units, refer to the following manuals for information on the
CJ1-H CPU Unit elements.
Section 1 outlines the features and application of the Loop Controllers and provides Loop Controller
specifications.
Section 2 describes the names and functions of parts, and provides other information required to
install and operate Loop Controllers.
Section 3 provides information on the control mechanism, basic operation, exchanging data with other
Units and software, and fail-safe countermeasures for Loop Controllers.
Section 4 describes a simple example of how to use Loop Controllers.
Section 5 describes basic examples of combining function blocks.
Section 6 provides information on how to use FINS commands.
Section 7 provides information on errors that may occur while running of Loop Controllers and guide-
lines for troubleshooting these errors.
Appendix A describes how to use the Step Ladder Program block on the LCB@@s and Appendix B
describes how to use the Sequence Table block on the LCB@@s.
Name Contents Cat. No.
(suffixes omitted)
SYSMAC CJ Series
Programmable Controllers Operation Manual
CJ1G/H-CPU@@H, CJ1G-CPU@@P,
CJ1MCPU
@@,CJ1G-CPU@@
Provides an outlines of and describes the
design, installation, maintenance, and other
basic operations for the CJ-series PLCs.
W393
SYSMAC CS/CJ Series
Programmable Controllers
Programming Manual
CS1G/H-CPU
@@-EV1, CS1G/H-CPU@@H,
CS1DCPU@@H, CS1D-CPU@@S,
CJ1G/H-CPU
@@H, CJ1G-CPU@@P,
CJ1M-CPU
@@, CJ1G-CPU@@
This manual describes programming and
other methods to use the functions of the
CS/CJ-series PLCs.
W394
SYSMAC CS/CJ/NSJ Series
CJ2H-CPU6
@-EIP, CJ2H-CPU6@,
CJ2M-CPU
@@, CS1G/H-CPU@@H,
CS1G/H-CPU
@@-EV1, CS1D-CPU@@H,
CS1D-CPU@@S, CJ1H-CPU@@H-R,
CJ1G/H-CPU
@@H, CJ1G-CPU@@P,
CJ1M-CPU
@@, CJ1G-CPU@@,
NSJ@-@@@@(B)-G5D,
NSJ
@-@@@@(B)-M3D
Programmable Controllers Instructions Refer-
ence Manual
Provides detailed descriptions of the instruc-
tions. When programming, use this manual
together with the manuals for your CPU
Unit.
W474

Omron SYSMAC CS Series Specifications

General

Brand	Omron
Model	SYSMAC CS Series
Category	Controller
Language	English