Omron SYSMAC CS Series User Manual

265
How to Use the Sequence Table Block Appendix B
Conditions
The following contact signals can be used for sequence table conditions.
Signal Notation on CX-
Process Tool
screen
Types Settings on CX-
Process Tool screen
Setting method Example
Input IN (source speci-
fication)
Contact input or
contact output
ITEMs from func-
tion blocks
Input Tab Page source
specification: Block and
ITEM
Select the block and
ITEM and select the
ITEM number from the
detailed information.
For block address
001 and ITEM 086:
001.086
CSV tag and tag
ITEM (contact
input or contact
output ITEM for
control or opera-
tion block)
Input Tab Page source
specification: Tag No.
Select the ITEM tag and
select the ITEM from
the detailed information.
For the A/M switch
for the Master01
CSV tag:
Master01.A_M
User link table
tag name (I/O
memory in CPU
Unit)
Input Tab Page source
specification: User link
table
Select the area type
and select the user link
table tag name from the
detailed
information.
For SW01 user link
table tag:
LNK007:SW01
Timer/counter
completion sta-
tus or status con-
tact, such as a
pre-alarm status
contact for a
timer/counter
Input Tab Page source
specification: Element
Specify the timer/
counter number and
select the status contact
from the detailed
information.
---
TBL (block
address)
Reference table Input Tab Page source
specification: Block and
ITEM
Select the block
address.
Rela-
tional
Expres-
sion
(parameter 1) <
(parameter 2)
(parameter) <
#(value)
“<” can be
replaced with
other compari-
son symbols
Result of com-
parison for rela-
tional expression
Relational expression
types are set in the com-
mand classification on
the Relational
Expression Tab Page.
The same settings are
possible for parameters
1 and 2 as for the inputs
listed
above, i.e. Block and
ITEM, Tag No., user link
table, or element), or a
value
(constant) can be set.
Set the relational
expression (<, #, #, =, >,
or #) parameter 1, and
parameter 2.
For elements, specify
the number and then
select the present value
of the PV, the remaining
time, or the counter
value.
For a user link
table tag type value
equals 200:
(LNK005:type =
#200)

Omron SYSMAC CS Series Specifications

General

Brand	Omron
Model	SYSMAC CS Series
Category	Controller
Language	English