ix
About this Manual:
This manual describes the installation and operation of the CS1W-HIO01, CS1W-HCP22, and
CS1W-HCA22 Customizable Counter Units and includes the sections described below. The Customiz-
able Counter Units provide both normal contact I/O with special I/O as ideal control capabilities for many
applications. The Customizable Counter Units are classified as CS1 Special I/O Units.
Please read this manual and all other manuals for the Customizable Counter Units listed below carefully
and be sure you understand the information provided before attempting to install or operate a Customiz-
able Counter Unit.
Manual Cat. No. Contents
CS1W-HIO01/HCP22/HCA22
Customizable Counter Units
Operation Manual
(this manual)
W378 Describes the hardware and software operation of the Customiz-
able Counter Units.
CS1W-HIO01/HCP22/HCA22
Customizable Counter Units
Programming Manual
W384 Describes the memory areas and programming instructions of
the Customizable Counter Units.
SYSMAC WS02-CXPjj-E
CX-Programmer
User Manual
W361 Provide information on how to use the CX-Programmer, a Win-
dows-based Programming Device that supports the CQM1H-se-
ries PCs.
CQM1H Series
Programmable Controllers
Operation Manual
W363 Describes Programming Console operations that can be used
connected to the Customizable Counter Units.
Section 1 describes the features of the Customizable Counter Units and the devices required in an ex-
tended system configuration.
Section 2 provides performance specifications and I/O specifications for the Customizable Counter Unit.
Section 3 provides the names of the different components of the Customizable Counter Unit and explains
the procedures required for installing and wiring the Unit.
Section 4 provides details on the way in which data is exchanged between the Customizable Counter
Unit and the CPU Unit.
Section 5 provides details on the settings made using the Unit Setup Area in the Customizable Counter
Unit.
Section 6 provides details of the settings made using the I/O memory areas in the Customizable Counter
Unit.
Section 7 provides information on interrupts, pulse inputs, pulse outputs, and analog outputs.
Section 8 explains the internal processing of the Customizable Counter Unit, and the time required for
processing and execution.
Section 9 provides information on troubleshooting errors that can occur with the Customizable Counter
Unit.
The Appendix provides precautions required when programming or monitoring the Customizable Count-
er Unit with the CX-Programmer.
WARNING Failure to read and understand the information provided in this manual may result in
personal injury or death, damage to the product, or product failure. Please read each
section in its entirety and be sure you understand the information provided in the section
and related sections before attempting any of the procedures or operations given.
!
To Next Page
Loading...
