Omron V430-F Series User Manual For Communication Settings

2
Controlling Operation and Data
Output with Parallel I/O
2-1 Controlling Operation and Data Output with Parallel I/O ..........................2 - 2
2-1-1 Basic Operation with a Parallel I/O Connection.............................................2 - 2
2-1-2 Wiring and Electrical Specifications for Parallel I/O...................................... 2 - 3
2-1-3 Change the Behavior of Operation ............................................................... 2 - 5
2-1-4 Change the Type of Trigger .......................................................................... 2 - 6
2-1-5 Timing Charts for each Trigger Mode ........................................................... 2 - 7
2-1-6 Sample Ladder Program............................................................................... 2 - 8
2-1-7 Change the Assignments for the Output Signal (Output 1 to 3) ON
Condition ....................................................................................................... 2 - 9
2-1-8 Change the ON/OFF timing of the Output Signal (Output 1 to 3) ............... 2 - 17
2-1-9 Change the Polarity of Output Signal (Output 1 to 3) ................................. 2 - 20
2-1-10 Controlling Operation with Signals from an External Device ...................... 2 - 21
2 - 1
V430-F Series Autofocus Multicode Reader User Manual for Communication Settings
2

Omron V430-F Series Specifications

General

Brand	Omron
Model	V430-F Series
Category	Barcode Reader
Language	English