Omron V430-F Series User Manual For Communication Settings

4-3
4 Controlling Operation and Data Output with PROFINET
V430-F Series Autofocus Multicode Reader User Manual for Communication Settings
4-1 Overview of PROFINET
4
4-1-1 Types of PROFINET
There are two PROFINET standards: PROFINET CBA and PROFINET IO.
 PROFINET CBA
Inter-device communication using components. Mainly used between controllers.
 PROFINET IO
Control by I/O data between a controller and devices.
The communication specifications of PROFINET IO are described below.
4-1-1 Types of PROFINET
The V430-F supports PROFINET IO. PROFINET IO uses the same device model as PROFINET DP.
The
information of each device is described in a GSD (General Station Description) file based on XML
(Extensible Markup Language).
Communication Specifications of PROFINET IO
Communication
Specifications
Type Details
V430-F Support
Periodic data
communication method
RT (real-time)
communication
Uses standard Ethernet
hardware and achieves
the same level of
performance as the
existing Fieldbus.
Supported
IRT (Isochronous
real-time) communication
This method provides a
higher level of assurance
than RT that
communication will be
executed within a specific
time. Intended for use in
systems such as motion
control that require strict
real-time.
Not supported

Omron V430-F Series Specifications

General

Brand	Omron
Model	V430-F Series
Category	Barcode Reader
Language	English