Omron V430-F Series - Appendices; A Command List and Ethernet;Ip Specifications; B V430 Input and Output Modules

150 pages

To Next Page

To Previous Page

Appendices

A Command List and EtherNet/IP Specifications............................................A - 1

B V430-F Input and Output Modules ...............................................................B - 1

V430-F Series Autofocus Multicode Reader User Manual for Communication Settings

Main Page

Intended Audience3
Applicable Products3
Manual Structure4
Page Structure4
Icons5
Table of Contents7
Safety Precautions9
Precautions for Safe Use10
Precautions for Correct Use11
Regulations and Standards12
Related Manuals13
Revision History14
Communication Specifications Overview15
Confirming the System Configuration16
V430-F Series System Configuration16
Communicating with an External Device18
Basic Control Operations of the Code Reader18
Applicable Communications Protocols for the V430-F Series19
Controlling Operation and Data Output with Parallel I/O21
Basic Operation with a Parallel I/O Connection22
Controlling Operation and Data Output with Parallel I/O22
Wiring and Electrical Specifications for Parallel I/O23
Change the Behavior of Operation25
Change the Type of Trigger26
Timing Charts for each Trigger Mode27
Sample Ladder Program28
Change the Assignments for the Output Signal (Output 1 to 3) on Condition29
Change the ON/OFF Timing of the Output Signal (Output 1 to 3)37
Change the Polarity of Output Signal (Output 1 to 3)40
Controlling Operation with Signals from an External Device41
Controlling Operation and Data Output with Ethernet45
Controlling Operation and Data Output with Ethernet/Ip46
Ethernet/Ip Overview46
Communication with the Code Reader over Ethernet/Ip Connection48
Communication Flow between PLC and Code Reader49
Communication Settings (Ethernet/Ip)50
Tag Data Link Setting Methods52
Status and Control Signals for each Input and Output Assembly55
Timing Charts by Assembly Type56
Sample Ladder Program58
Accessing the NJ-Series Controller Communication Areas Using Variables59
Communicating with the Code Reader with Ethernet/Ip Message72
Controlling Operation and Data Output with Serial (TCP)73
Serial (TCP) Overview73
Communications Processing Flow73
Communication Settings (Serial (TCP))74
Setting the Data to Output after a Read76
Controlling Operation from an External Device81
Serial Command List85
Overview of PROFINET92
Types of PROFINET93
V430-F Communications for PROFINET Connections96
Types of Communication Areas96
Setting up PROFINET Communications97
Configuring Network Settings in the V430-F97
Timing Charts by Module Type100
Controlling Operation and Data Output with RS-232C103
Communications Processing Flow104
RS-232C Wiring104
Controlling Operation and Data Output with RS-232C104
Communication Settings (Serial (RS-232C))106
Setting Data to be Output after Reading a Code (Serial (RS-232C))109
Additional Symbol Information that Can be Appended (Serial (RS-232C))109
Controlling Operation with Serial (RS-232C) from an External Device109
Serial Command List (RS-232C)109
Appendices111
A Command List and Ethernet/Ip Specifications111
B V430 Input and Output Modules111

Omron V430-F Series - Appendices; A Command List and Ethernet;Ip Specifications; B V430 Input and Output Modules

Table of Contents

Other manuals for Omron V430-F Series

Related product manuals