4 Controlling Operation and Data Output with PROFINET
4-2
V430-F Series Autofocus Multicode Reader User Manual for Communication Settings
4-1 Overview of PROFINET
PROFINET is a network for industrial use that applies industrial Ethernet (100 Mbps, full duplex
) to
PROFIBUS DP.
PROFINET is an open standard that is managed by PI (PROFIBUS and PROFINET International) and
is used in a variety of types of industrial equipment. Because PROFINET uses standard Ethernet
technology, a variety of general-purpose Ethernet devices can be included in the network.
This section provides an overview sufficient to use the V430-F with PROFINET.
Refer to the standards IEC61158, IEC61784, and PI for detailed PROFINET specifications.
To Next Page
Loading...
