With nothing currently registered as the Master Symbol, when a Read is executed with
Matchcode ON, the result is Mismatch.
By setting the NewMaster bit in the Output Assembly to 1, the next code that is read will be regis-
tered as the Master Symbol data.
<Register the Master Symbol Data>
NewMaster bit
set toTrue.
New_Master_Requested
becomes True and next
Read data is registered
as Master Symbol.
<Trigger Input>
3 Controlling Operation and Data Output with Ethernet
3 - 26
V430-F Series Autofocus Multicode Reader User Manual for Communication Settings
To Next Page
Loading...
