Section 7 Errors and Indicator Status
Nonfatal Errors
The NORM/ERR indicator flashes once if an error occurs in communications between the Reader/
Writer and host device or in communications with an RF Tag.
Tag Data Link Error
If you use more than one Reader/Writer for multi-Reader/Writer operation, the ERROR indicator will light red once on
any Reader/Writer for which an error is detected during communications with an RF Tag. The NORM indicator will light
green once on any Reader/Writer that completes communications with an RF Tag normally. When the Master Reader/
Writer returns a response to the host device, the NORM or ERROR indicator will light depending on whether the results
given in the response is for a normal or error completion.
RUN NORM/ERR
Lit green or fast
flashing green
Flashes red once
RUN NORM/ERR
Lit green Flashing yellow