Opticon NLV-5201 - How to Read

Chapter-2
Before Using
NLV-5201 User's Manual
11
1st
How to Read
2.4
The scanner read target code by acquiring the image.
Reading starts by the following method.
1. Send command trigger “Z” via serial communication. (RS-232C, USB-COM)
2. Turn ON external trigger input. (RS-232C loose end)
3. Detect target to read in auto trigger mode.
4. Press trigger key. (Used when testing and maintenance etc.)
Reading Reference Standard mode (SR): Approx. 113 cm Scan Area (Refer to 2.10)
Distance (Refer to 2.5.1)
High Resolution model (HD): Approx. 63 cm
(Refer to 2.5.2)
Ultra High Resolution model (UD): Approx. 43 mm
(Refer to 2.5.3)